Yes – 3400mAh integral battery
Sick of mods that all look the same? Then this kit is for you. The Eleaf Tessera is equal-parts beautiful and functional. Beautiful because of the three-dimensional geometric patterns on the front and back fo the device and functional because of the large internal battery that gives you up to 150W of power.
The 3400mAh internal battery means that this is perfect for anyone that’s just getting into sub-ohm vaping. You don’t need to buy batteries separately and you don’t need to purchase an external charger.
Instead, the micro USB charging cable supports 2A quick charging that will fully charge the internal cell in two or three hours. This is fast for such a powerful device and is only possible because Eleaf have introduced a safety feature (ENU) that monitors and regulates the battery temperature during charging.
On the front of the device, the 3D screen juts out to show you important information like the power, the time and the battery level in percentage terms. The text is nice and big and the definition of the screen is crystal clear, so that even your granny could use this mod. Using three big buttons in the bottom corner of the device, you can cycle through the settings which include a power mode, a range of temperature control modes and two memory modes. You can also activate stealth mode and change the menu colors using the action buttons in the bottom corner.
Eleaf have partnered the Tessera mod with their 4ml Ello TS tank. This basic sub-ohm tank uses some of the same design features, like similar colors and geometric triangles to ensure continuity between mod and tank, and to keep that vape juice tasting great.
Also in the kit, you get two sub-ohm coils that are rated for use between 30 and 80W. With these coils, the 25mm Ello tank delivers good cloud performance at a range of outputs.
NOTE: The TESSERA can be reset in case it could not be powered on after upgraded.
Eleaf Tessera 150W Kit Features and Specifications:
- Dimensions: 42mm X 30.5mm X 133mm
- Construction: Zinc Alloy and Pyrex Glass
- Output mode: TC-Ti / TC-Ni / VW / SS-Stainless Steel / TCR / Bypass
- Output wattage: 1W to 150W
- Resistance range: 0.05 – 1.5 ohms for TC mode
- Resistance range: 0.1 – 3.5 ohms for VW / Bypass Mode
- Temperature range: 100 – 315C / 200F – 600F
- Output Voltage: 0.5V – 8V
- Battery: 1 x Internal 3400 mAh
- Display: 1.45 inch TFT Color Screen
- New UI with Optional Theme Colors
- Built in Clock-UI
- Centered 510 pin for tanks up to 25mm with no overhang
- Ventilation Holes for Improved Heat Dissipation
- Compatible with Tanks up to 25mm in Diameter
- Dual Circuit Protection / Temperature Protection System
- Firmware Upgradeable
- 2A Quick Charging
Eleaf ELLO TS Sub-Ohm Tank Spec:
- Tank Capacity: 2ml or 4ml with Included Parts
- Adjustable Dual Airflow Holes for Optimal Flavor and Vapor
- Retractable Top Fill System
Eleaf Tessera 150W Starter Kit Includes:
- 1x Eleaf Tessera 150W TC Mod
- 1x ELLO TS Sub-Ohm Tank
- 1x 0.2 ohm HW1 Kanthal Single Cylinder Coil
- 1x 0.3 ohm HW2 Kanthal Dual Cylinder Coil (Preinstalled)
- 1x QC USB Cable
- 1x Bag with Spare Parts
Yes – 3400mAh integral battery